| TECHNOLOGY/PERFORMANCE |
| Sensor Technology |
ElectroChemical – Fuel Cell (alcohol specific) |
| Measuring Range [mg / 100 ml BAC (Blood Alcohol Concentration)] |
0 to 500 |
| Drift of the breath analyzer in 6 months period (mg / 100 ml BAC) |
2 |
| Time required for re-calibration |
12 |
| RoHS Compliant |
Yes |
| The Equipment meet RFI requirement as per EN:5008-1/1992(emission) and EN 50082 1:1997(immunity) or equivalent requirements |
Yes |
| BATTERY OF ANALYSER |
| Chemistry of Rechargeable Battery |
Li-ion, Ni-MH |
| Power Source |
Rechargeable Battery and also work through automobile 12 V DC Power |
| DISPLAY / INDICATOR / STORAGE / INTERFACE |
| Display Type |
LCD, LED, TFT LCD |
| Record Memory (Minimum) |
50000 |
| Capable to display the geolocation of test inspection / location |
Yes |
| Record Entry |
Through Integrated/Touch Screen, Through Alphanumeric KeyBoard |
| Capable to capture the clear image of test target |
Yes |
| Data Interface |
USB, Wifi, Bluetooth |
| GPS |
Yes |
| Camera |
Yes |
| PRINTER |
| Printer consists of Inbuilt Rechargeable Battery, Paper for offence printouts, Charger |
Yes |
| Printer |
With |
| Type of Printer |
Portable Dot Matrix Printer with Wireless/ Bluetooth Connectivity, Internal Thermal Printer |
| Printer consists of Inbuilt Rechargeable Battery, Paper for offence printouts, Charger |
yes |
STATUTORY REQUIREMENTS |
| the equipment meets the requirements of the applicable latest Central Motor Vehicle Rules and all Govt notifications |
Yes |
| The equipment can be used as an evidential instrument for Traffic Law Enforcement, The instrument is hand held, portable and easy to operate |
Yes |
| PHYSICAL |
| Size ( mm x mm x mm ) |
210 x 60 x 30 |
| Weight |
300gm |
| WARRANTY |
| Warranty |
1 |
| OPERATING CONDITIONS |
| Minimum Operating Temperature |
-15 |
| Maximum Operating Temperaturen |
65 |
| Relative Humidity Non Condensing (%) |
95 |
| ENVIRONMENTAL / CERTIFICATION |
| Conformity to Dry Heat test at 50 degree C for 16 hours as per IS:9000 latest |
Yes |
| Conformity to Damp heat at 40 degree C – 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest |
Yes |
| Conformity to Cold test at – 5 / -10 / – 15 / -20 degree C (as applicable) for 4 hours as per IS:9000 latest |
Yes |
| Availability of Test Reports from Central Govt / NABL approved / ILAC accredited Lab to prove conformity to the specification |
Yes |
