Breath Alcohol Analyser

BAA1
Breath Alcohol Analyser (FQ-4000P)
  • Brand Name : FREAQUER
  • Sensor Technology : ElectroChemical – FuelCell (alcohol specific)
  • Measuring Range [mg / 100 ml BAC (Blood Alcohol Concentration)] : 0 to 500
  • Drift of the breath analyzer in 6 months period (mg / 100 ml BAC) : 1
  • Record Entry : Through Integrated/Touch Screen
  • Record Memory(Minimum) : 50000
  • Camera : No
  • Printer : With
  • Type of Printer : Internal Thermal Printer
  • Warranty : 1
Specification
BATTERY OF ANALYSER
Battery Backup Time (continuous duty) 24
Low Battery indication Yes
Chemistry of Rechargeable Battery Li-ion
Number of Spare Rechargeable Batteries supplied with the instrument 0
Battery Voltage 7.4 Volt
Power Source Rechargeable Battery and also work through automobile 12 V DC Power
DISPLAY / INDICATOR / STORAGE / INTERFACE
Display Type LED
Record Memory (Minimum) 50000
Capable to display the geolocation of test inspection / location Yes
Record Entry Through Integrated/Touch Screen
Capable to capture the clear image of test target Yes
Data Interface USB
GPS Yes
Camera No
Conformity to Dry Heat test at 50 degree C for 16 hours as per IS :9000 latest Yes
Conformity to Damp heat at 40 degree C – 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest Yes
Conformity to Cold test at – 5 / -10 / – 15 / -20 degree C (as applicable) for 4 hours as per IS: 9000 latest Yes
Availability of Test Reports from Central Govt / NABL approved / ILAC accredited Lab to prove conformity to the specification Yes
TECHNOLOGY/PERFORMANCE
RoHS Compliant Yes
Sensor Technology ElectroChemical – Fuel Cell (alcohol specific)
Time required for re-calibration ($$$$) 12 month
Sampling Error Detection Alarm on wrong sampling
Sampling modes Both Active and Passive
Measuring Range [mg / 100 ml BAC (Blood Alcohol Concentration)] 0 to 500
Accuracy +/- 5 % or better
Drift of the breath analyzer in 6 months period (mg / 100 ml BAC) 0
The Equipment meet RFI requirement as per EN:5008-1/1992(emission) and EN 50082 1:1997(immunity) or equivalent requirements Yes
STATUTORY REQUIREMENTS
the equipment meets the requirements of the applicable latest Central Motor Vehicle Rules and all Govt notifications Yes
The equipment can be used as an evidential instrument for Traffic Law Enforcement, The instrument is hand held, portable and easy to operate Yes
PHYSICAL
Size ( mm x mm x mm ) 210 x 60 x 30
Weight 300gm
PRINTER
Printer consists of Inbuilt Rechargeable Battery, Paper for offence printouts, Charger Yes
Printer With
Type of Printer Internal Thermal Printer
OPERATING CONDITIONS
Minimum Operating Temperature -15
Maximum Operating Temperaturen 65
Relative Humidity Non Condensing (%) 90
WARRANTY
Warranty 1