| DESKS |
| Material of Desk Top |
25 mm thick prelaminated Particle Board |
| Material for Desk Top support |
1 no. horizontal support of MS Angle size 25 mm x 25 mm x 2.5 mm thick |
| Material of Support Structure for Desks or Side Pannel |
MS Angle of size 25 mm x 25 mm x 2.5 mm thick |
| Height of Desk Top in mm (± 10 mm) |
500 mm |
| Width of Desk Top in mm (± 10 mm) |
300 mm |
| GENERIC |
| Type of DESKS / BENCHES |
ONLY BENCHES |
| Desks / Benches Configuration |
SINGLE SEATER |
| Length of Desks, Seats and Backrest (if provided) in mm (±20 mm) |
450 mm |
| Transportations / Freight charges |
Offer Prices are on Free Delivery at Consignee site basis. |
| Approval of Advance sample |
No Advance Sample |
| BENCHES / SEATING |
| Material of Seat and Backrest (if provided) |
12 mm Thick Plywood Only |
| Material for Seat support |
2 nos. Vertical support of MS angle size 25 mm x 25 mm x 2.5 mm thick |
| Material of Support Structure |
MS angle of size 25 mm x 25 mm x 2.5 mm thick |
| Material of Seat Cushion |
WITHOUT CUSHION |
| Width of Seating in mm (±10 mm) |
270 mm |
| Height of Seat in mm (±10 mm) |
370 mm |
| Width of backrest if provided in mm (± 5 mm) |
200 |
| Back Support for Seating of same material as seating |
Provided without cushion |
| MISC |
| Ends of the sides |
To be double fold after cutting |
| Dressing of Components |
Free from crack/surface free from distortion/ no burrs in holes. |
| Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) |
Not Applicable |
| COLOUR & FINISH |
| Colour of Finish / Paint |
As per buyer’s choice |
| Desk top finishing |
Two long sides shall have post form half round profile and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue |
| Logo / Marking |
Marking to be done on desks and benches as per Buyer instructions |
| WARRANTY |
| Warranty period in number of years |
1 |
| CERTIFICATION |
| Test reports to be furnished to buyer’s on demand |
YES |
