Freaquer Water Bath

water bath
Freaquer Water Bath(FQ-WB0067)
  • 14L Waterbath, Basic control, 115v
  • State-of-the-art control technology
  • Optional water level control
  • Temperature range up to +95 °C (with Peltier cooling unit CDP115 from +10°C)
  • 6 model sizes (7 to 45 litres volume)
  • Extensive range of accessories: e.g. a Peltier cooling unit, flat or gable cover, shaking device, floor shelf, test tube rack
  • High-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
Specification
Temperature
Temperature range in °C min. 5°C above ambient up to +95°C with additional boiling mode (+100°C)
Control of standard components
Temperature 1 Pt100 sensor class A in 4-wire-circuit
Timer integrated digital timer from 1 min. to 99,59 hours for: ON continuous operation WAIT (delayed on for continuous and limited timed operation) HOLD
Safety
Temperature control mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath
Temperature control in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value)
Autodiagnostic system microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
Heating concept
Heating Baths corrosion-proof large-area heating on three sides
Standard equipment
Controller digital display (LED) of set and actual temperature (0,1°C resolution) and of (remaining) programme time
Stainless steel interior
Dimensions W x H x D in mm w(A) x h(C) x d(B): 350 x 140 x 290 mm
Interior easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded
Volume 14L
Liquid level min. (H) 97 mm
Liquid level max. (I) 120 mm
Textured stainless steel casing
Dimensions w(D) x h(G) x d(E): 578 x 347 x 436 mm
Electrical data
Voltage 230 V, 50/60 Hz
Electrical load approx. 1800 W (during heating)
Ambient conditions
Installation The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
Ambient temperature +5 °C to +40 °C
Humidity rh max. 80 %, non-condensing
Overvoltage category II
Pollution degree 2
Packing/shipping data
Dimensions approx incl. carton w x h x d: 670 x 530 x 400 cm
Net weight approx. 15 kg
Gross weight carton approx. 21 kg